오디오/메인스피커

스털링 브로드캐스트 LS 3/6 스피커---------------판매되었습니다.

아르페지오 오디오샵 2017. 9. 28. 15:26









3765


스털링 브로드캐스트 LS 3/6 스피커입니다.

브리티시 사운드와 BBC 전통을 유지하면서 사운드의 응집력과 밀도감을 향상시켜 섬세한 이미징과 다이내믹 레이지를 향상시킨 영국 Stirling BroadCast의 신모델로 스테레오파일 B class에 선정된 스피커입니다. 
고전미와 전통적인 스타일이 매력적인 체리 원목 마감 인클로저에 신개발 드라이버와 네트워크 설계로 품위있는 사운드의 질감이 돋보이며, 한결 향상된 음악성과 함께 넉넉한 포용력과 풍부한 공기감마저 느낄수 있습니다.
색상은 CHERRY 마감입니다.

신품입니다.
판매가는 송료포함 600만원이고 다른제품과 절충교환 가능합니다.
광주지역 직거래 가능하고 전국택배 가능합니다.

010-8615-1858
poohlover4364@hanmail.net

Power handling: 90w continuous, 150w short term, IEC268
Max sound level:107dB, pair @2m
Input impedance: 8ohm nominal
Input connections: Bi-wire, 4mm terminals (plugs/wires to 4mm cross sectional area)
Frequency response: 45Hz to 17kHz +/-3dB (on HF axis @1m)
Crossover frequencies: 3kHz, 13kHz
Sensitivity: 87dB/1watt/1m
Cabinet details: Reflex loaded. 30cm (w) x 30cm (d) x 63cm (h)
Weight:18.5kg
Veneers available: Cherry, Walnut, Zebrano, Ebony, Rosewood

Our BBC LS3/6 Reference Loudspeaker is a 3-way loudspeaker designed by Derek Hughes to be as close to the original BBC LS3/6 specification as possible with modern components. It is built under licence from the BBC, which was only obtained after submission to the BBC for rigorous examination to ensure adherence to the original specification.

We have taken advantage of the greater consistency and linearity of modern drive units and use a very high quality crossover to mesh the custom made drive units, including a super-tweeter, into thin wall (9mm), damped construction, birch plywood cabinets finished in pair matched wood veneer with a matt lacquer finish. The cabinets utilise double thickness rubber damping pads to tame cabinet wall resonances and foam for internal standing wave dampening. The cabinets feature screw-on, removable front and rear panels as per the BBC "lossy" cabinet design ideal. Our version of the LS3/6 offers greater power-handling than the original, with a smoother frequency response, much lower coloration and better dispersion.

The new speaker ideally requires 400mm high stands and we have partnered with Something Solid and Appollo to ensure the correct stands are available. Interested customers should contact us, Something Solid, or Appollo for further details.

The LS3/6 is sold with our standard 5 year warranty on the drive units and crossovers.