타운젠트(Townshend) 수퍼트위터---------------판매되었습니다.

 

 

 

 

 

 

 

 

2231

 

타운젠트(Townshend) 수퍼트위터 입니다.
실물사진입니다.

모델명은 Maximim SuperTweeter 입니다.
90Khz 까지의 초고역을 완벽히 구현하는 리본형 수퍼트위터입니다.
레벨 컨트롤 스위치로 7단계까지 조절이 가능하며, SACD, LP, HD Audio등 광대역을 재생시키기 위한 최적의 제품으로 대부분 스피커와 이상적인 매칭이 가능합니다.
사운드의 해상도와 디테일 뿐만 아니라 깊이감과 입체감이 함께 향상되며, 다양한 장르를 유연하게 소화하는 올라운드 성향의 사운드를 완성시킬수 있는 제품입니다.
전용케이블과 스텐드 있습니다.

상태 극상입니다.
판매가는 송료포함 65만원입니다.
광주지역 직거래 가능하고 전국택배 가능합니다.

010-8615-1858
poohlover4364@hanmail.net

The key benefit of Towshend Audio's supertweeters is that they are a ribbon design, allowing a more accurate reproduction of the high frequencies

Connection to the Supertweeters is by 4.0mm bananas. The included connecting cable is fitted with 4.0mm banana 'piggy back' connectors to allow you to easily add them to existing speakers.

Embodying super-powerful neodymium magnets and an ultra thin eight micron pure aluminium ribbon, the Maximum Supertweeter offers outstanding performance in an easy to drive, compact package. The low frequency -3dB point of the first order crossover is set at 20Khz. Output may be set to suit speakers with sensitivities ranging from 80dB to 110dB, adjusted in steps by an seven position switch on the rear. The correct setting is easily found by trial and error. Input connectors are 4mm banana sockets. All copper conductors, including the matching transformer windings cables, are deep cryogenically treated (EDCT) for unrivalled fidelity.

Pressure relief vents in the sides of the case are provided to allow the air pressure on the ribbon to equalize in the event of sudden pressure changes. The Maximum Supertweeter may be connected directly across the output of amplifiers up to 350W. An automatically resetting fuse helps prevent ribbon damage in the event of overload. The Maximum Supertweeters are best placed centrally on top of your existing speakers. The 1.5m cables are connected to the main speakers’ tweeter terminals or directly across the power amplifier feed. A choice of spade or ‘piggy back’ banana connectors are offered to facilitate connection. Please specify.

The Supertweeters are supplied as standard with 1.5m of Townshend Isolda impedance matched, EDCT Litz cable, terminated with ‘piggy back’ 4.0mm banana connectors. Spades available on request

Specifications:

Suitable for all speakers with sensitivities between 80dB and 110dB, including Electrostatics
Power rating: suitable for amplifiers up 350W Music Power
Dimensions. 50mm (W), 30mm (H), 100mm (D).
1.5m connecting cable included (can be longer if required)

Frequency Resp.  Up to 90kHz. (See graph)
Amplifier power: Up to 400W, unclipped music
Rating to DIN IEC 268: 500w peak
Max sensitivity (2.8V @ 1m) 89dB
Nominal impedance: 11 ohm (min), rising to 20 ohm
Drive unit: Pure aluminium ribbon.W 5mm, L 25mm, T, 0.01mm Mass 0.003grammes Ultra powerful rare earth neodymium magnets
Crossover: First order
Level control: 1:  74dB 2:  79dB 3:  83dB 4:  85dB 5:  87dB 6:  89dB
Dimensions: Each W 50mm (2"), H 30mm (1.2"), D 100mm (4") Shipping (pair)W 250mm (10"), H 50mm (2"), D 200mm (8")
Weight: Each 0.5 Kg (1.1lb) Shipping (pair) 1.2Kg (2.6lb)