오디오/아나로그

VPI TNT + SME V 턴테이블----------------------------------판매되었습니다.

아르페지오 오디오샵 2023. 3. 14. 12:27

VPI TNT + SME V 턴테이블입니다.
실물사진입니다.

VPI TNT 턴테이블과 SME V 톤암이 조합된 아나로그 플레이어입니다.
육중한 플레터와 4점지지 서스펜션에 의한 플로팅 설계, 미세한 속도를 정확하게 측정하며 컨트롤하는 독립된 전원부등 상급 턴테이블에 걸맛은 시스템 퀄리티를 보여주는 제품입니다.
SME V 톤암의 기품있는 자연스러움과 대형 턴테이블의 안정된 무대형성과 박진감 넘치는 리얼리티는 관능적이고 웅대한 사운드를 펼쳐보이며, 아나로그를 위해 철저하게 설계된 중량급 턴테이블의 마력적인 질감을 들을수 있습니다.

전압 220볼트, 상태 양호합니다.
판매가는 카트리지 제외 450만원, 나가오카 MP-500 카트리지 포함 550만원입니다.
광주지역 직거래(타지역은 배송협의)만 가능합니다.

010-8615-1858
poohlover4364@hanmail.net

VPI TNT
TNT was designed as a state of the art table to take advantage of the newly designed linear tracking air-bearing tonearms represented by the Eminent Technology, Souther, and Airtangent. All of which required a large level tonearm board, very stable suspension, and the counter torque pullies to not be near the platter in the center. This is why the TNT had 3 pulleys.

The chassis was made from two layers of 1” black acrylic welded together. The motor was a Hurst 600 RPM AC Motor driven by a PLC (power line conditioner) power supply to set the speed accurately. The corners were solid Delrin, machined out to mount on the chassis with damped springs internally. Leveling was done by rotating the corner knobs on top. The TNT was before the creation of the Periphery ring clamp therefore the platter was an 11.5" diameter platter (the periphery ring clamp will not work on this platter!)

The TNT 600 RPM motor was part of a "T" structure that was located under the chassis. The "T" also help the other 2 pulleys the platter belt would spin around. The TNT used 1 belt when it was in production.